Gardner Denver GD2000 Mobile Range III Rig
2006 IRI Model IR1700 mast
59-ft long rated at 30,000 (13,340-daN) static hook load capacity
Mast is complete with; ¾-in cabling, dual raising cylinders
10-in crown sheaves, make-up/break-out wrench and Petol wrench
SMN7681-16
Integral hydraulic system including;
Pumps, common reservoir, thermal exchanger and
Infrastructure for interconnecting plumbing.
Atlas Copco Model GD2000 top drive rated at;
0-5000 ft. torque, 125 rpm, Fast Feed down 200 fpm /60.96 mpm
Fast Feed up 137 fpm / 20.42 mpm.
Braden Model CH230 drawworks rated at 18,000-lbs strung w/ ¾-in line.
King Model CM25 swivel
Condition Observations
Gardner Denver Model FXX-172 duplex pump rated at 52-hp (39-kW)
Maximum BHP and 330-RPM maximum on jackshaft
Pump features an 8-in stroke x 6-in bore, 4-in NPT suction connection x
3-in NPT discharge connection and is energized via hydraulic motor
(Pump removed at time of viewing)
C & H Fabricating Range III pipe handling arm;
3,300-lb load capacity, 10,000-ft/lbs maximum torque capacity
2005 International Model 5600i6X8 tandem-steer x tri-drive truck
Powered by Cummins ISX425 diesel engine unitized with Eaton 18-speed manual transmission.
Truck is mounted on (2) 20,000-lb front axle and (3) 18,000-lb rears.
VIN-1HTXSAPT55J035183
351,507-km 11,292-hrs
Drive train leaks; clear, minor, mod, severe
Body/Paint Appearance; clear, minor, mod, severe
Interior Appearance; clean, minor, mod, severe
Glass; clear, minor, mod, severe
Tires; matched & remaining tread averaged 18-mm (front) / 18-mm (rear).
CVIP Current, Expired
Overhead Current
