DRILLMEC HYDRAULIC DRILLING RIG PACKAGE MODEL HH600 FA
Hydraulic Rotary Drilling Rig DRILLMEC Model HH 600, designed for drilling and servicing of oil and gas wells. The rig and its accessories are designed to operate in climate temperatures from 0°C to plus +40 °C. The electric equipment and devices, the drilling rig is designed to satisfy the requirements of API RP 500
Technical data
• Drill pipe stands handling Range 2 (double) and range 3 casing
• Max pull 545 metric ton (1,200,000 lbs)
• Drilling floor height from ground level 11 m (36 ft)
• Top drive stroke 22.60 m (74 ft)
TELESCOPIC MAST
The hoisting system is based on telescopic mast fabricated in compliance with API 4F, operating as
an hydraulic hoist to pull up and push down.
Maximum pull up is 545 metric ton (1,200,000 lbs)
SUBSTRUCTURE
Drill floor height 11 m (36 ft)
Clear height under rotary beams 9,2 m (30 ft)
DC racking capacity
• N° 3 DC 9.1/2”
• N° 18 DC 8.1/2”
• N° 18 HWDP 6.5/8”
HYDRAULIC TOP DRIVE
Built in Top Drive System made by DRILLMEC driven by one electric motor AC with static rating 545 metric ton
(1,200,000 lbs) and max torque 69.700 N·m (51.400 lbf·ft) max speed 257 rpm
PIPE HANDLING SYSTEM
Automatic vertical pipe handling system remotely controlled from driller cabin.
RIG INTRUMENTATION
Data acquisition system & drilling instrumentation made by Drillmec.
TORQUE WRENCH, AUTOMATIC POWER SLIPS, POWER TONG
DRILLMEC HH-Series
MUD PUMPS
Two Drillmec mod. 12T1600 electric driven by two AC motors
