DRILLMEC HYDRAULIC DRILLING RIG PACKAGE MODEL HH220 FA
Semitrailer mounted high mobility rotary drilling & workover rig Drillmec HH220 FA Full Automatic and fully hydraulic operated. The rig and its accessories are designed to operate in climate temperatures from -20°C to +40°C and are designed to satisfy the requirements of API RP 500.
Technical data
• Drill pipe stands handling Range 3 (single) and range 3 casing
• Max pull 200 metric ton (440,000 lbs.)
• Max pull down 20 metric ton (44,000 lbs.)
• Drilling floor height from ground level 7,710 mm (25.3 ft.)
• Top drive stroke 16.00 m (52 ½ ft.)
TELESCOPIC MAST
The hoisting system is based on telescopic mast fabricated in compliance with API 4F, operating as an hydraulic hoist.
Maximum pull up is 200 metric ton (440,000 lbs.), pull down20 metric ton (44,000 lbs.)
SUBSTRUCTURE
Drill floor height 7.71 m (25.3 ft.)
Clear height under rotary beams 7 m (23 ft.)
DC racking capacity 18 Lengths of 6 ½” Drill Collars; 3 Lengths of 8” DC
HYDRAULIC TOP DRIVE
Built in Top Drive System made by DRILLMEC driven by 3 top head hydraulic motors with max. Pull up 200 metric ton
(440,000 lbs.), max. pull down 20 metric ton (44,000 lbs.) and max torque 3.370 daN·m (24.850 lbf·ft)
PIPE HANDLING SYSTEM
Automatic vertical pipe handling system remotely controlled from driller cabin
RIG INTRUMENTATION
Data acquisition system & drilling instrumentation made by Drillmec.
TORQUE WRENCH, AUTOMATIC POWER SLIPS, POWER TONG
DRILLMEC HH-Series.
MUD SYSTEM
Five tanks, for a total capacity of 300 cubic meter. Shaker tank is equipped with 3 Brandt Atlas Cobra shale shaker
MUD PUMPS
Two Drillmec mod. 12T1600 electric drive by GE 752 DC motors
DIESEL GENERATORS
Three MTU generators mod. 12V4000G41, 1750 kVA, 60 Hz, 600 V
SKIDDING SYSTEM
Drillmec skidding system for longitudinal skid on cluster wells (max 15 m)
