Gardner-Denver 1100M Drilling Rig 1500hp
Rated for 16,000 feet
Mast-Skytop Brewster 142' x 1,000,000# SHL Capacity, 25' leg spread.
Serial #78-111. Racking board with a full setback of 255 stands of 4 1/2" drill pipe.
Crown block 7 x 60'. Twelve line capacity. Mast weight is 116,095#
Sub Base- Ideco 21' High step-down box on box.
Modified to meet API 4F-RP4G Category 4 specs.
Rated to 1,000,000# and a setback capacity of 700,000#
Drawworks- Gardner Denver 1100M Single Drum Drawworks.
Rated to 1500hp, with 1 3/8" Lebus grooved drum, three engine sectional compound,
Driven by three (3), CAT 3412 engines (each rated @ 725hp/2000RPM.
Drawworks equipped with Parkersburg V-200 Hydro-Matic auxiliary brake.
Kelco make-up and break-out Catheads
Block/Hook- Ideco UTB 525 Six (6) 1-3/8" sheaves.
525 ton block/hook combination
Rotary Table- Gardner Denver 27-1/2" x 53" rotary table.
Chain driven from drawworks
Swivel- Continental-Emsco LB-500 swivel with spare quick-change packing
Pumps- Two (2) 3NB1300 (Chinese) Tri-plex pumps, 1300hp.
Both pumps have the same serial #. Both pumps equipped with pulsation
dampeners and pop-off valves. Pump #1 is charged by a 6" x 8" centrifugal pump
Powered by a 40hp electric motor. Pump #2 is charged by a 50hp electric motor.
Both pumps are belt driven by a D-399 Caterpillar engine, rated @1,225hp
Mud Pits- Three (30 pits, 1,500 barrel capacity. Within the pits there are sand traps,
Settling pit, and two 60 barrel spot/slugging tanks. Pits also equipped with
Eleven (11) derrick 10hp, KF87AM215 horizontal mud agitators,
Two (2) 6" x 8" centrifugal mixing pumps, both driven by 75hp electric motors.
Three (3) 6" x 8" centrifugal desander/desilter/degasser pumps,
All driven by 75hp electric motors. Pits also have covers included
Shaker- One (1) Derrick Dual FLC-503/High 'G' Shaker.
Two (2) 25hp motors on each shaker.
Derrick model #SGX-34-18-460/480 6-001. 1800RPM
Mud Cleaner- One (1) Derrick FLC-503/High 'G' (2-16) Desander/Desilter/Mud Cleaner.
25hp motors, derrick model #SGX-34-18-460/480 6-001. 1,800 RPM.
Two (2) 10" Desanding Cones (1,200 gpm).
Sixteen (16) 4" desilting cones (1,280 gpm)
Degasser- One (1) Derrick VACU-FLO 1200 Degasser
T.P. House- One (1) 10'W x 10' H x 56' L combination office/living quarters for toolpushers
House- Top house with lockers and knowledge box. BOP remote start.
Bottom House - Tool/change house combination. 8'W x 9'H x 38' L.
Lockers and storage shelves for rig supplies.
Diesel Tank- One (1) 10'W x 7'H x 34'L with two (2) 1.25" x .75" transfer pumps.
Tank volume is 17,800 gallons. 212 gals. /in
Water Tank- One (1) 7'8" W x 6'H x 30'L tank with three (3) 5" x 6" centrifugal transfer pumps
Each powered by a 30hp electric motor. Tank volume is 500 barrels.
Gen. House- One (1) 10'W x 9'H x 50'L generator house,
Housing two (2) Caterpillar SR4 500KW generator sets.
Two (2) Curtis Model RS40 air compressors, rated @ 150cfm @ 150psi.
Breaker panels and switch gear.
Rig Basket - One (1) 8'W x 3'H x 34' L rig basket for hauling/handling tools,
Rotary bushings, tongs, etc.
BOP Control Unit- C.P.C. Six (6) station BOP control unit with rig floor remote.
Powered by a consolidated pressure control, Model CPC BP-4032 Triplex pump,
Powered by an Emerson 20hp electric motor, cat. #1C20E8, plus two (2) air driven pumps.
Unit has a 150 gallon capacity.
Slick line unit- Five Star Model 092X20000 Surveyor. Unit has 20,000' of .092 slick line.
Hyd. Unit- One (1) Nova HPU-S40 Hydraulic power unit.
Powered by a WEG model 04018XP3E32UTC 40hp electric motor.
Driving a type K3VL807A-10RKS-PO/1-L@ Hydraulic pump.
Unit is used to operate Kelly spinner and pipe spinner.
