DRILLMEC HYDRAULIC TOP DRIVE MODEL HTD350
Drillmec hydraulic top drive model HTD 350 increases performances and help in operations such as directional or horizontal drilling. It is supplied with an independent hydraulic power pack and controls and with a transportation cradle designed to hold it and prevent moving damages.
HYDRAULIC POWER UNIT .
Hydraulic power unit will be mounted on a heavy-duty oilfield skid, inside a container, suitable for -20°C / +40°C ambient temperature, it driven by diesel engine (Caterpillar C18 630HP), it will supply power for: top drive head, back-up wrench, hydraulic jacks and outlet for Power tong.
Overall dimension will be (L x H x W): 8.2 m x 2.88 m x 2.4m (approx.)
Max oil pressure: 350 bar
Max weight of HPU: 12 metric ton (approx.)
HYDRAULIC TOP DRIVE .
I.D. full opening 3" (76 mm)
Variable speed 0 to 190 rpm
Continuous torque range 0 to 3924 daNm (28941 lbs –ft.)
Max Make-Up torque (intermittent) 4414 daNm (32548 lbs-ft)
Max Break-out torque (intermittent) 6621 daNm (48834 lbs-ft)
Max. Pull up static 700,000 lbs (311 kN)
Max pressure Wash pipe suitable 5,000 psi
Connection Lower pin suitable 5” DP (NC50)
CONTROL PANEL & ADDITIONAL COMPONENTS
Saver sub
Handling skid – top drive
Top drive guide
Hoses top drive
Casing make-up device (load capacity of 350 tons)
Travelling block connection
Circulation swivel
Rotating double hook
Elevator links system (350 ton capacity)
Pipe handler - hydraulic clamp
I-bop valve