Friday, April 19, 2024
Back To Gallery: Kremco 650 #WR503
Kremco 650 #WR503 18 Aug 2014
Kremco 650 #WR503 Price:$3,763,000.00
kremco-650
Kremco 650 #WR503 Gallery: Kremco 650 #WR503 Description: Price:$3,763,000.00
Views: 6350 Loves: 0 Tag Count: 1
Additional Info File Size: 92.42 KB Dimensions: 640x480 Created: 18 Aug 2014 Updated: 18 Aug 2014

Product Description

MAST
112 ft Skytop Derrick @ 136 daN's ( 300,000 lb )Rating
Racking capacity
5000 M of 88 mm tubing
6000 M of 73 mm tubing
7000 M of 60 mm tubing
1-1/8 Drill line, 150 T 8 Line McKissick Block

BOP EQUIPMENT
ERCB Class III BOP NACE 5000 PSI
179 mm c/w 60.3 mm and 73 mm, 88.9 mm rams.
Work Spool with 1 - 50 mm port and Valve
73 mm EUE Safety Valve - 5000 PSI
88.9 mm Hydraulic Rod BOP 2000 PSI
88.9 mm Swab Lubricator 1000 PSI
88.9 mm Swab Valve
1-1/4 Swab tool string

DRAW WORKS
650 HP rated
Kremco 650, 42 x 10 Glycol circulated

c/w 22" Hydromatic Aux brake retarder
38 - 8 Sandline drum w/ 4200 M 9/16 line
Crown Saver/ Dead Man Break

Skid Mount Pump
30 x 10, 3 - Beam Oilfield Skid
450 HP 60 series Detroit
5x8 Triplex Oilwell 358 pump, 5000 PSI
7 Valve 5000 PSI Manifold
1M3/Minute Rate

Auxillary Equipment Skid
35 MPa BOP Test Stump
5000 L fuel Storage
3000 L glycol
500 L electric Hydraulic power pack.
Catwalk 2.5 m's x 13.8M Heavy Duty c/w 4-4 Leg tumblers
2-8x44 ramp mats and 1-8x20 beam mat
Full line of Expendables
2 -125 HP Boiler

Tank
64 M3 - 3 compartment
Trough, Degasser, Mix Hopper
100 M of 50 mm Line Pipe, 5000 PSI
15 M of 4" Suction Hose
4 - Beam Oilfield Skid
Full Walk Ways
Man Lift Rescue
2" Steam Coil

Handling Equipment
Foster 54-93 and 58-93 tubing tongs c/w Air backup
Cavin C Air Power Tubing Slips
Tubing Elevator's 60.3 mm, 73 mm, 88.9 mm, 114 mm EUE
Standard Equipment to run 60.3 mm, 73 mm 88,9 mm 114 mmEUE
5000# Kelley Hose

Crew Change Unit / Class III
Combo Crew Change 24 hr setup
2-100 KW Isuzu Light Plants
First Aid, Complete Safety Package
4 - 30# ABC Fire Extinguishers
2 - SCBA w/ spare bottle
60 Gal ERCB G-37 class III Closing unit.

All inspections are current on the mast including level 3 inspections
there are approx 4500 logged hours - 19500 hrs remaining
Its comes with 2-100 KW 3 phase gen set, fully field ready tool room
comes complete, All work areas are clean Tidy and organized.

It has been well maintained through out its short life.
This rig is currently strung up 8 lines.

This rig was built brand new in 2006, using reconditioned Kremco 650
DD draw works complete with water/glycol cooled main break drums.

There is a full V-Door and 8 ft wide catwalk. 3 Egresses from rig Floor
The Boiler is a 125 Hp 2 pass Scotch Marine type, 14M3 water tank and
5M3 fuel.

The derrick Egress is the DV Escape Pod System.

This rig is currently in Drayton Valley AB.