Saturday, November 18, 2017
Sort gallery by:
View:
Ideco H-3000hp #R1546
Ideco H-3000hp #R1546 Price: Contact Us ideco h 3000hp

PRODUCT DESCRIPTION

1- Mast: Lee C. Moore, Cantilever Type, 30,000 ft Drilling Depth Capacity (5” Dp), 156 ft height, 30 ft x 30 ft Drill floor, Static Hook Load 1,555,000 lb, Casing Capacity 1,500,000 lb, Max. Lines 14, Set-back Load Cap. 30,840 ft 5” DP (800,000 lb).

Mast is provided with the following:

 1- Monkey Board.

 2- Casing Stabbing Board (adjustable from 20-50 ft)

 3- Belly Board.

2- Substructure: Lee C. Moore, Sling Shot, Height above Height above G.L 32 ft ,  Clearance under the Rotary Beams 32 ft., Casing Capacity 1,500,000 lb,  Set-back Capacity 30,840 ft 5”, 25.6 DP / 800,000 lb, Drill Floor 30 x 30 ft.

Substructure is provided with the following:

 I - V-door with Catwalk.

 II - Allenvator to fit substructure.

 III - 2 each 2 ft wide safety slide for emergency egress from Rig

       Floor to Ground Level.

 IV - 3 each Stairways for access from Rig Floor to/from Ground 

       Level and Mud Tanks.

3- Drawworks: Ideco H-3000 hp mechanically driven, with main drum grooved for 1 5/8” Drilling Line. Dwwks is provided with Make-up/Spinning Cathead, Foster Type 37S-AK, Breakout Catheads, Foster Type 24B-AK and Crown-O-Matic with emergency activator switch on Driller’s Console.

4- Auxiliary Brake: Baylor Auxiliary Eddy Current Brake, Model 7838 c/w 100 Bbls Brake Cooling water tank.

The Drawworks c/w Auxiliary Brake is installed on the extended sling shot base skid.

5 - Other Hoisting System Components:

  A - Crown Block:   Lee C. Moore, 816 Ton, 8 Sheaves, Grooved for 1 5/8” Drlg. Line

       Traveling Block: IDECO TB750-7-60 1-5/8” Groove.

  B - Hook:   BJ Hook Dynaplex 750 Te 5750

  C - Elevator Links:

                 One Set Weld less Elevator Links ---- 2 5/8” x 129”, 350 Ton Capacity.

                Or ----2 7/8" x 108", 350 Ton Capacity

                One Set Weld less Elevator Links, 3 ½” x 144”, 500 Ton Capacity

6 - Rotary Table:

     A -  IDECO SBS LR 375 Rotary Table c/w GE 752 mechanically driven.

         Rotary Table is furnished with Master Bushing c/w insert bowls to handle  

         Tubular from 2 3/8” O.D to 13 ½” OD and Kelly Bushings for 3 ½” Square

         And 5 ¼” Hexagonal Kellies.

         In addition a complete set of Split Type Casing Bushings are provided for

         The 30”, 24” and 18 5/8” are provided.

      B - Old IDECO SBS LR 275 Rotary Table c/w GE 752.

7 - Swivel: IDECO P-500 (to be used in the absence of TDS as the Top Drive System is

      provided with an integrated Swivel).

      Rotary Swivel operating pressure 5000 psi. Dead load capacity 500 Ton, API

      Bearing capacity @ 100 rpm.  Fluid passage bore /Wash pipe I.d. – 3”, Stem

      Connection (LH Box Down) 7 5/8” API Reg. Kelly Connection (LH Pin Down)

      - 6 5/8” API Reg.

8 - Mud Pumps: 2 each Emsco-1600 hp Triplex Mud pumps are provided worked mechanically; each has a rated input of 1600 hp @ 150 rpm and stroke length of 12” & each one has target block installed.

9 - High Pressure Mud Discharge Hoses/Piping:

Standpipe Manifold: One each 5” x 5000 psi WP Dual Standpipe Manifold with independent 5”-5000 psi WP Mud Pump discharge lines feeding from each mud Pump into the Standpipe Manifold.

Discharge Lines in Mast:

 2 each 5” x 5000 psi WP Standpipe discharge lines in Mast.

High Pressure 2” Valves/Lines:

 4 each 2” x 5000 psi Valves from Manifold to:

  • One to Upper Kill Line.
  • One to Lower Kill Line.
  • One to Cellar Jet.
  • One for displacing Cement or other general circulating from Rig Floor    

  level.

 

10 - Mud System :

1.     High Pressure Pipe Work bundle composed of 7 each 5" with different lg

2.    2 each 5"-10,000 psi Mud Goose neck

3.    4” Cement Manifold

4.    Shale Shaker Skid

5.    Shale Shaker Tank “Sand Trap Tank”

6.     3 each Mud Tank

7.    Active Mud Tank

8.    Degasser

9.     2 each Mud Cleaner Unit

10.   Mud Cleaner Power Pack

          11.   Drill Water Tank Load “Rectangular Tank”

          12.   Drill Water Tank Load “Round Tank”.

          13.   Diesel Fuel Tank Load “Round Tank”. 

No.

Tank Name

Existing

Compartment Name

Capacity Bbls

1

Shaker

(270 Bbls)

Shaker Tank

120

Degasser

160

Desander

140

2

Intermediate#1

(500 Bbls)

Desilter

140

Mud Cleaner

---

3

Intermediate #2

(450 Bbls)

Active Tank #1

275

4

Suction

(450 Bbls)

Active Tank #1

275

5

Pill /Mix Premix

(500 Bbls)

Mud Mix Tank

275

---

---

Pill Tank

45

6

Reserve Tanks

(1000 Bbls)

Reserve Tank  #1

275

Reserve Tank  #2

275

7

Trip Tank

(100 Bbls)

Trip Tank

94

 

(3,270 Bbls)

 

2,074

 

11 - BOP Stacks :

Following BOP Stacks will be made available:

  •  13 5/8” – 10,000 psi Single Ram:
  •  21 ¼” - 2000 psi Annular:
  •  21 ¼” - 2000 psi Double Ram:
  • 13 5/8” - 5000 psi Annular:
  • 13 5/8” – 10,000 psi Double Ram
  • All stacks to be provided with Pipe & Blind Rams to cover the tubular      sizes provided. In addition, the 13 5/8”-10,000 psi Stack should be provided with Shear

12 - BOP Controls :

    i. One Koomey Type 80 – nine (9) station accumulator closing unit, 3000 psi 

       WP with Twenty eight (28) 11 Gallon Bottles and 315 Gallon reservoir

       capacity. Two (2) Electric Triplex Pump with 20 HP AC motors and (3) 50:1

       ratio air pumps

      

     ii. 6 each 20 ft Long suitcases with 1” Steel hydraulic lines to connect

        accumulator unit to BOP:

 

     iii1 each Remote Control Panel with indicator lights

13  Choke Manifolds, Kill & Choke Lines, Coeflex and Steel Hoses:

      Upper Choke Manifold: 4-1/16” x 3-1/16”-10,000 psi with Two (2) 3-1/16”-10,000 psi manual adjustable chokes and Two (2) Thornhill Craver 3-1/16” – 10,000 psi Hydraulic              Adjustable Chokes. It is undersized Choke "2 1/16" OD & Valves"

14   Rig Power Plant: 4 each Caterpillar Engine D-399 c/w National Torque Converter C300-100

15  Camp Power System

Qty.

Genset Full Description

2

Caterpillar D-3412 Diesel Engines driving two (2) Caterpillar 450 Kw AC Generators or equivalent.

16 - Air Compressors : Some of them are exists

Main Air Compressors (Existing):

Qty.

Item Description

2

Sullair Model 12-BS40 or equivalent, each equipped with 50 hp AC motor, rated for 150 psi maximum operating pressure and includes dual control, pipes, valves, fittings and air tanks.

1

Ingersol Rand 150 scfm driven by 40 hp motor.